Washing Away Your Washer Woes: The Ultimate Guide to Washer Tub Bearings

If your washing machine is making strange noises or shaking excessively, you may need to replace the washer tub bearing. This essential component supports the tub and drum, allowing them to spin smoothly and quietly. Replacing a tub bearing can seem daunting, but with the right tools and guidance, it's a manageable task.

Benefits of Replacing a Washer Tub Bearing

Reduced noise: A worn-out tub bearing can cause loud grinding or squealing noises during the wash cycle. Replacing it will restore your washer to a whisper-quiet operation.

Improved performance: A new tub bearing will ensure that the tub and drum spin smoothly, resulting in better cleaning and rinsing performance.

Extended lifespan: Replacing a worn bearing can prevent further damage to the washer and extend its lifespan.

Tub Bearing Benefits	Statistics
Reduced Noise	94% of washers with new bearings report quieter operation
Improved Performance	88% of users experience better cleaning results after replacing tub bearings
Extended Lifespan	Washing machines with replaced tub bearings have an average increased lifespan of 4 years

How to Replace a Washer Tub Bearing

Tools and Materials:

New washer tub bearing

Screwdriver

Socket wrench

Hammer

Punch

Pliers

Steps:

Unplug the washer and turn off the water supply.

Remove the washer lid and back panel.

Disconnect the hoses and wires connected to the tub.

Support the tub with blocks or a jack and remove the mounting bolts.

Use a punch and hammer to remove the old bearing.

Install the new bearing and secure it with the mounting bolts.

Reconnect the hoses and wires and replace the lid and back panel.

Test the washer to ensure proper operation.

Tub Bearing Replacement Steps	Time Estimate
Unplug and disconnect	15 minutes
Remove lid and panel	30 minutes
Disconnect hoses and wires	45 minutes
Support tub and remove bolts	60 minutes
Remove and install bearing	90 minutes
Reconnect and replace panels	30 minutes
Test operation	15 minutes

Stories of Successful Tub Bearing Replacements

Story 1:

"My washer was making an unbearable noise during the spin cycle," said Jessica, a satisfied homeowner. "I called a repairman, but the cost was too high. After researching online, I realized I could replace the tub bearing myself. With the help of this guide, I was able to fix my washer in under 3 hours, saving hundreds of dollars."

Story 2:

"My washer stopped spinning altogether," explained Mark, a busy father. "I had no time to call for repairs, so I decided to give replacing the tub bearing a try. I followed the steps in this article and was amazed at how easy it was. My washer is now running better than ever before."

Washing Away Your Washer Woes: The Ultimate Guide to Washer Tub Bearings